Pump Station Service | Milford & Godalming
Alton Facility Services attended a property in Milford, Godalming, to complete a full pump service and fault find. The pump chamber was cleaned down, the pump and float arrangement were checked and the system was left operating correctly.
Call 01420 561661 Request a Quote
The Project
Alton Facility Services attended a property in Milford, Godalming, to complete a full pump service and fault find. The pump chamber was cleaned down, the pump and float arrangement were checked and the system was left operating correctly.
The Challenge
The customer requested a full pump service and fault find to check the condition and operation of the system.
Regular pump station servicing helps identify faults early, reduce the risk of chamber problems and confirm that pumps, floats and pipework are operating as expected.
The Solution
- Attended site to inspect the pump chamber.
- Washed down the chamber as part of the service.
- Checked the pump with integral float.
- Carried out a full service and operational check.
- Confirmed no issues were found and left the system working as it should.
The Result
The pump chamber was cleaned, serviced and checked. No faults were identified and the system was left operating correctly.
This is a good example of preventative pump station servicing, giving the customer confidence that the system is working before a breakdown occurs.
Quick Facts
- Service
- Pump station service and fault find
- Location
- Milford, Godalming
- Property type
- Private property
- Job type
- Pump chamber service
- System detail
- Pump with integral float
- Outcome
- No faults found; system left working
What routine pump station servicing helps to check
A sewage or drainage pump station can appear to be working normally while wear, debris or a sticking float is beginning to affect reliability. A planned service gives the engineer an opportunity to inspect the chamber, confirm how the pump starts and stops, and identify visible issues before they become an emergency callout.
For this Milford and Godalming visit, the work centred on a full service and fault find. The chamber was washed down, the pump with its integral float was checked, and the system was operated to confirm that it was working correctly. No fault was found, so the customer received confirmation that the installation could remain in service.
The exact checks required depend on the equipment and site arrangement. A routine visit can include the pump, float switches, guide rails, lifting chains, non-return valves, discharge pipework, control equipment and high-level alarm where these components are installed and accessible. The engineer can then explain any maintenance concerns and whether further investigation or repair is recommended.
Signs that a pump station needs attention
- The pump starts more frequently than usual or continues running.
- A high-level alarm activates or the chamber level rises.
- There are unusual noises, vibration or repeated electrical trips.
- Odours, slow drainage or backing up appear around the connected system.
- The chamber has not been inspected or serviced within its planned maintenance schedule.
If an alarm is active or wastewater is backing up, contact a pump engineer promptly rather than continuing to reset the equipment.
Why planned servicing matters
Pump stations operate in a demanding environment and are relied upon whenever gravity drainage cannot move wastewater to the required discharge point. Regular inspection helps property owners understand the condition of the equipment, keep the chamber cleaner and plan repairs at a suitable time. It also provides a useful service record for domestic properties, landlords, estates and managed commercial sites.
A service does not guarantee that a component will never fail, but it can reduce avoidable risks by highlighting wear, damaged fittings, control problems or poor operating conditions. Where a fault is found, AFS can advise whether the appropriate next step is adjustment, cleaning, component replacement, a pump station repair or a wider system review. For sites that need scheduled support, see pump servicing and Alton Assure planned maintenance.
Site Photos
Need similar help?
Alton Facility Services can help with pump station servicing, drainage, pump and wastewater works across Hampshire, Surrey, West Sussex and surrounding areas.
Call 01420 561661 Request a Quote