Pump Station Faults & Maintenance

Commercial Pump Station Fault Repairs in Chichester

We provide specialist Pump Station repairs in Chichester, supporting coastal properties, commercial premises and residential developments. Our engineers respond quickly to pump failures, alarms and sewage issues to keep systems operating safely.

Request a Quote Call 01420 561661 What We Do

ChichesterLocal area support

Repair & refurbishmentPractical replacement advice

Planned servicingReduce repeat failures

01420 561661Speak to AFS

Repair the cause, not only the alarm

AFS investigates pump failures, high-level alarms, control faults, blocked pumps, float issues, valves and internal pipework.

Many properties in Chichester rely on Pump Stations due to low-lying land, coastal water tables and developments without gravity drainage. These systems play a critical role in managing sewage and wastewater safely and efficiently.

We repair Pump Stations in Chichester, addressing pump failures, electrical faults, blocked wet wells and alarm issues. Our engineers combine emergency repairs with planned pump servicing and specialist pump station repair expertise.

Clients in Chichester typically require Pump Station repairs due to:

All pump station repairs in Chichester are completed to manufacturer standards, with safety, reliability and long-term performance as priorities.

Breakdown and alarm investigation

Diagnosis of high-level alarms, pumps not starting, pumps running continuously, tripping, blockages and rising levels.

Repairs and refurbishment

Pump replacement, controls, floats, probes, valves, guide rails, chains, internal pipework and chamber improvements.

Planned pump station maintenance

Routine servicing, testing and reporting to identify deterioration and reduce avoidable failures.

How we handle pump station faults

Triage the problem

We review the alarm, symptoms, site risk, previous reports, access and whether tanker support may be required.

Inspect and diagnose

The pump station, controls, level devices, valves, pipework and operating conditions are checked.

Repair, test and report

Agreed work is completed, the system is function-tested and any further maintenance or replacement needs are explained.

Common pump station faults

Pump stations can fail mechanically, electrically or because the chamber and pipework are not operating as intended.

A pump may be blocked, worn, incorrectly set, air-locked or unable to overcome the system head. Floats and probes can become fouled, control panels can fail, and non-return valves can stick or leak back into the chamber.

Repeated alarms should not be treated as a simple reset issue. Rising levels, excessive starts, long run times, odours or recurring trips can indicate a wider problem that needs investigation.

Issues we investigate

High-level alarms and rising chamber levels
Pump not starting, tripping or running continuously
Blocked or damaged sewage pumps
Float switch, probe and level-control faults
Control panel, contactor and alarm faults
Non-return valves, isolation valves and pipework defects

Servicing and refurbishment options

Planned maintenance helps find faults before they become a flooding or wastewater emergency.

A service can include operational checks, pump current and condition checks, float or probe testing, alarm verification, valve inspection, guide-rail and chain checks, chamber observations and a written record of defects.

Refurbishment may involve replacing pumps, controls, internal discharge pipework, valves, pedestals, guide rails, chains and level controls while retaining a serviceable chamber.

Typical repair and maintenance work

Pump removal, repair or replacement
Control panel and alarm replacement
Float switch and level-probe replacement
Guide rails, pedestals and lifting chains
Internal pipework and valve replacement
Planned servicing and maintenance reporting

Pump station repair across West Sussex

AFS supports sewage and drainage pump stations in Chichester, Littlehampton, Petworth, Pulborough and surrounding West Sussex areas.

For an alarm or breakdown, provide the site postcode, alarm message, chamber level, number of pumps, control-panel details and any previous service report. Do not enter the chamber or attempt to handle sewage-contaminated equipment.

Where levels are rising, reduce incoming water use where practical. AFS will advise whether the first attendance should include electrical diagnosis, pump lifting equipment, tanker support or other site controls.

Information that helps triage

Site address and access contact
Alarm or fault symptoms
Pump and panel photographs
Current chamber level
Previous service reports
Impact on the property or site

Recent pump jobs and updates

Work our engineers and crews have finished recently, from our own job updates.

Severe flooding in a pump station chamber with Mitsubishi Electric air conditioning units visible above

Emergency Pump Station Repair at a Nursery in Spencers Wood15 October 2026

Pump Investigation in Ascot Identifies Failed Components and Replacement Requirements4 September 2026

Large Pump Removal, Workshop Repair and Return to Site5 August 2026

See all our latest jobs →

Other Pump Station Repair & Servicing service areas

Use the service overview or explore other established AFS location pages. If your town is not listed, send the postcode so coverage can be checked from Liphook.

Pump Station Repair & Servicing service overview Guildford Bordon Hampshire Basingstoke Liphook Alton

Request Pump Station Repair & Servicing advice or a quote

Send the details through and a member of the AFS team will come back to you.

Pump Station Repair & Servicing FAQs

What should I do if the pump station alarm is sounding?

Reduce water use where practical, avoid opening or entering the chamber, and contact a pump station engineer. If levels are rising, tanker support may also be required.

Do you repair domestic and commercial pump stations?

Yes. AFS supports domestic, estate, commercial, care, education, industrial and managed-site pump stations where the access and scope are suitable.

Can you replace only the failed pumps?

Sometimes. The pump duty, guide-rail arrangement, controls, valves, chamber condition and cause of failure need to be checked before confirming a pump-only replacement.

How often should a pump station be serviced?

The frequency depends on usage, site risk, pump type and manufacturer guidance. Higher-risk commercial or sewage stations normally need more frequent planned checks than lightly used domestic systems.

Can you refurbish an old pump station?

Yes. Where the chamber remains serviceable, AFS can advise on pumps, controls, floats, guide rails, chains, valves and internal pipework refurbishment.

How much does pump station repair cost?

The cost depends on the fault, pump size and duty, chamber access, lifting requirements, controls, replacement parts, tanker support and testing. Send photographs, the site postcode and any service records for an informed attendance or quotation scope.

Who repairs sewage pumping stations in Hampshire, Surrey and West Sussex?

Alton Facility Services diagnoses, repairs, services and refurbishes domestic and commercial sewage and drainage pump stations across these counties and nearby areas, subject to access and the required scope.

Need help with pump station repair & servicing?

Send an enquiry or call the AFS team. We’ll confirm the practical next step and whether a site visit is needed.

Call 01420 561661