Basingstoke Water Resilience

Rainwater Harvesting & Water Storage in Basingstoke

AFS designs and installs rainwater harvesting and water-storage systems around Basingstoke, with servicing and fault support for existing pumps, filters and controls.

Request a Quote Call 01420 561661 What We Do

BasingstokeLocal project support

System installationCollection to delivery

Water storage tanksAbove or below ground

50-mile service areaAround Alton GU34

Rainwater systems for Basingstoke homes and commercial sites

Large commercial roofs can provide substantial catchment, while homes, schools and estates may have regular irrigation or toilet-flushing demand. The design must connect catchment, usable storage and demand realistically.

AFS supports projects in Basingstoke, Chineham, Old Basing, Hook, North Waltham, Tadley and nearby north Hampshire areas within the normal service radius.

Commercial systems may support landscape irrigation, wash-down, toilet flushing and other suitable non-potable uses. Domestic systems can range from garden storage to buried tanks with pumps, controls and dedicated internal supplies.

Existing systems can be assessed for inadequate capacity, blocked filtration, low pressure, pump failure, repeated tripping and level-control faults. Send the postcode, intended use, tank details and photographs for an initial review.

Complete harvesting systems

Catchment, filtration, storage, pumps, controls and suitable distribution planned together.

Commercial water storage

Storage and delivery equipment for defined irrigation, wash-down and operational requirements.

Pump repairs and upgrades

Diagnosis, maintenance and replacement equipment selected for the required duty.

How Basingstoke storage projects progress

Define demand

Confirm the source, proposed use, daily or seasonal consumption and reserve required.

Survey the site

Review catchment, access, tank position, services, structure or ground, pipe routes and overflow.

Specify and quote

Set out storage, filtration, pumps, controls and the agreed installation scope.

Install and commission

Test filling, delivery and controls, then explain routine inspection and maintenance.

Commercial rainwater harvesting in Basingstoke

Warehouses, offices, schools and managed sites can combine useful roof catchment with regular non-potable demand.

A commercial assessment considers roof area, occupancy or process demand, plant space, tank access, electrical supply, delivery pressure and the consequences of losing the stored-water supply.

Where continuity matters, the system may include level alarms, duty and standby pumps, automatic refill controls or remote monitoring.

Commercial design inputs

Roof and drainage drawings
Daily and peak demand
Available plant and tank space
Required flow and pressure
Electrical and control requirements
Maintenance and vehicle access

Water storage tanks for Basingstoke properties

Tank capacity should be matched to refill, demand, available space and the required reserve period.

Above-ground tanks need a suitable supporting base, protected fittings and practical access. Underground storage can preserve surface space but requires a site-specific approach to excavation, groundwater, loading and future maintenance.

For rainwater, filtration and overflow are integral to the storage design. Non-potable water must remain correctly separated from drinking-water systems.

Storage decisions

Usable volume
Catchment or refill source
Tank location and access
Supporting base or ground
Overflow route
Pump and level controls

Rainwater pump servicing and repairs in Basingstoke

No water can result from the pump, but also from an empty tank, blocked filter, suction leak, valve or control fault.

AFS reviews the system before recommending repair or replacement. Pump labels, control displays, tank level, fault history and photographs help identify the right first step.

Maintenance can cover accessible filters, pumps, pressure equipment, valves, level devices, alarms and controls. Replacement equipment is matched to flow, pressure and operating pattern.

Faults investigated

No water or low pressure
Pump tripping or cycling
Loss of prime
Blocked filtration
Level-control faults
Failed or obsolete pumps

Domestic and estate rainwater systems

Homes and estates may use stored rainwater for irrigation, external cleaning, toilet flushing and other suitable non-potable purposes.

Retrofit projects depend on access, drainage, possible tank positions and routes for dedicated pipework. A garden-only arrangement may be more practical where internal alterations are disproportionate.

The survey also considers how the tank and equipment will be inspected, cleaned, repaired and eventually replaced.

Useful survey information

Site postcode
Approximate catchment area
Proposed water uses
Possible tank location
Access dimensions
Existing drainage details

Recent pump jobs and updates

Work our engineers and crews have finished recently, from our own job updates.

Borehole Pump Replacement in East Meon15 October 2026

Backup Generator Flood Protection System Serviced15 October 2026

5-Star Review: Pump Guide Rails Sorted in Thatcham15 October 2026

See all our latest jobs →

Other Rainwater Harvesting Pump Services service areas

Use the service overview or explore other established AFS location pages. If your town is not listed, send the postcode so coverage can be checked from Liphook.

Rainwater Harvesting Pump Services service overview Bordon Alton Guildford Winchester Hampshire Surrey

Request Rainwater Harvesting & Water Storage advice or a quote

Send the details through and a member of the AFS team will come back to you.

Rainwater Harvesting & Water Storage FAQs

What Basingstoke areas do you cover?

AFS normally works within about 50 miles of Alton, including Basingstoke, Chineham, Old Basing, Hook, North Waltham, Tadley and nearby areas.

Can a commercial roof supply a rainwater system?

Often yes. Useful yield depends on the catchment area, drainage arrangement, rainfall, filtration and whether the site has enough regular non-potable demand.

How is storage capacity calculated?

Capacity considers refill, catchment, demand, seasonal patterns, available space and the required reserve. The largest possible tank is not automatically the best choice.

Can you add storage to an existing installation?

Often yes, after checking the existing inlet, overflow, connections, pump duty, controls, supporting structure and maintenance access.

Do you repair existing rainwater pumps?

Yes. AFS can investigate pumps, filters, valves, pressure equipment and controls before advising on repair, servicing or replacement.

Need help with rainwater harvesting & water storage?

Send an enquiry or call the AFS team. We’ll confirm the practical next step and whether a site visit is needed.

Call 01420 561661